1. Seal Less Design  
2. Self Priming  
3. Design For Safety  
4. Self Aligning Pump to Motor  
5. Longer Life  
6. Wide Application Range

Das Foot Valves are designed and manufactured of the superior and best export quality. A Foot Valve for a pump is a one way check valve. It lets water flow in one direction only/ towards the pump. It is placed at the bottom of the suction ...Foot Valves. Ball type valves cover wide range of applications like slurry, sewage, paper, chemicals in addition to agriculture.

Foot Valve Features:-

1.     Works excellently in muddy/clear water, viscous liquid, paper stock, slurries
2.     Perfect sealing
3.     Self cleaning
4.     Non clogging
5.     Superior Export Quality
6.     In-house manufacturing
7.     exporting to the global market
8.     domestic market all over india coverage

Das Diaphragm Valves are designed and manufactured of superior and export quality. Diaphragm valves are suitable for handling sticky and viscous fluids, slurries and highly corrosive and hazardous substances. It is needless to say that they could be used for handling air, water and normal liquid/gas flow as well. It is the most ideal valve to handle fluids that require high purity and should remain free from contamination. Diaphragm valves (or membrane valves) consists of a valve body with two or more ports, a diaphragm, and a "weir or saddle" or seat upon which the diaphragm closes the valve. The valve is constructed from either plastic or metal. Originally, the diaphragm valve was developed for use in industrial applications. Later on the design was adapted for use in the bio-pharmaceutical industry by using compliant materials that can withstand sanitizing and sterilizing methods. There are two main categories of diaphragm valves: one type seals over a "weir" (saddle) and the other (sometimes called a "full bore or straight-way" valve) seals over a seat. The weir or saddle type is the most common in process applications and the seat-type is more commonly used in slurry applications to reduce blocking issues but exists also as a process valve. While diaphragm valves usually come in two-port forms (2/2-way diaphragm valve), they can also come with three ports (3/2-way diaphragm valves also called T-valves) and more (so called block-valves). When more than three ports are included, they generally require more than one diaphragm seat; however, special dual actuators can handle more ports with one membrane. Diaphragm valves can be manual or automated. Their application is generally as shut-off valves in process systems within the industrial, food and beverage, pharmaceutical and biotech industries. The older generation of these valves is not suited for regulating and controlling process flows, however newer developments in this area have successfully tackled this problem. In addition to the well known, two way shut off diaphragm valve, other types include: Three way zero deadleg valve, sterile access port, block and bleed, valbow and tank bottom valve. Ball valves are used extensively in industrial applications because they are very versatile.

Diaphragm Valve Features:-

1.     Air to close actuated diaphragm valve
2.     Air to open actuated diaphragm valve
3.     Double acting actuated diaphragm valve
4.     Double diaphragm actuated valve (ATC & ATO)
5.     Side mounted Handwheel actuator (SMH)
6.     Diaphragm control valve for throttling
7.     Cylinder Operated Valve
8.     Manual Valves

Das Ball Valves are of Superior and Export Quality. A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it. The sphere has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle or lever will be inline with the port position letting you "see" the valve's position. The ball valve, along with the butterfly valve and plug valve, are part of the family of quarter turn valves. Ball valves are durable and usually work to achieve perfect shutoff even after years of disuse. They are therefore an excellent choice for shutoff applications (and are often preferred to globe valves and gate valves for this purpose). They do not offer the fine control that may be necessary in throttling applications but are sometimes used for this purpose. Ball valves are used extensively in industrial applications because they are very versatile.

Ball Valve Types:-

1.     Brass Ball Valves
2.     Bronze Ball Valves
3.     Brass Gate Valve
4.     Carbon Steel Ball Valves
5.     Gas Ball Valves
6.     Medical Gas Valves
7.     Plastic Ball Valves
8.     Stainless Steel Ball Valves

Das Gate Valves are designed and manufactured to have Superior Quality. The gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restric­tion is desired. The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry. For extremely thick fluids, a specialty valve often known as a knife valve is used to cut through the liquid.

• Gate Valve Types:-
• Knife Gate Valves
• Stainless Steel Gate Valve
• Brass Gate Valve
• Cast Iron Gate Valve
• Flanged Gate Valve
• Forged Gate Valve
• Welded Gate Valve
• Industrial Gate Valve

Das Industrial Valves are designed and manufactured of the superior and best export quality. We are the Manufacturers and exporters of the Industrial Valve like: Split Butterfly Valves, Butterfly Valve, Gate Valve, Ball Valve, Diaphragm Valve, Foot Valve, from Mumbai, India.

Industrial Valve Types:-

1.     Split Butterfly Valves
2.     Butterfly Valve
3.     Gate Valve
4.     Ball Valve
5.     Diaphragm Valve
6.     Foot Valve
7.     Exporting to the global market
8.     Domestic market all over india coverage

Das Valves™ Split butterfly valves offer safe, efficient ingredient transfer.
Our Pharmaceutical Safe Containment Split Butterfly Valves are designed for safe handling of non-sterile APIs and formulation ingredients.
During manufacturing process, when moving active pharmaceutical ingredients (APIs) and other sensitive materials around, we have got the solution about waste, efficiency and material integrity. Pharmaceutical Safe Split Butterfly Valves are designed to help streamline material transfer and eliminate worries about yield, contamination and other issues. When dealing with highly potent substances like APIs and highly potent APIs (HPAPIs) in a complex manufacturing environment, companies face a number of challenges.
During material transfer, effective engineering controls are crucial as employee safety is the primary focus.
However, we also aim for minimal disruption to the manufacturing process
Barrier technologies, like isolators and restricted access barrier systems (RABs), can provide better levels of protection and integrity in processes than traditional open environments.

The use of split butterfly valves (SBVs) technology integrated to either the isolator or RABS for the transfer of material in or out of the manufacturing process increases the integrity of the containment solution.
SBVs are designed to prevent contamination, operator contact, and cross-contamination of products in multi-use facilities. The flow of materials can be complex in solid-dose manufacturing and other processes, and the SBV helps increase safety, increase yield and avoid costly waste.
Both halves of the butterfly valves are combined during powder charging, which is intended to enable contained, efficient materials transfer.
Transferring material from one closed system into a separate closed system is one of the key difficulties in powder transfer.
The design specifications of the technology or device used in this process will meet the required accessibility, batch size and containment performance